How to Paint wash furniture
As an amazon associate, I earn from qualifying purchases made through affiliate links..
Paint washing furniture is one of my favourite finishes to do. It’s also a bonus for me that it usually sells fast too. If you want to see more of my work, slide on over to my Gallery or check out my Facebook and Instagram and give me a follow! I also have a Pinterest page for your project inspiration - and an Amazon Storefront with all of the materials I use during each project. If you are looking to see my How-to videos, click on over to my Youtube Channel!
Paint washing is quickly becoming a popular trend for furniture refinishers and here is why.
The finish is absolutely stunning
It is suprisingly easy to accomplish
The finish is quite forgiving to sanding errors
You can choose from literally any paint colour to create a wash
Ok, now that we have our piece, we need to remove the hardware.
After the hardware is removed, you are ready to get started! First thing.. You HAVE to clean your piece before sanding. “What if I am going to strip the finish off?” If this is the case, I don’t clean the piece first because a stripper will eat through everything sitting on top. So I will give you a walk through both options.
If you are sanding the entire piece with a sander, or by hand (please invest in a sander), You will want to clean the piece with a TSP cleaner. My favourite is TSP Alternative by Fusion Mineral Paint. You do not have to rinse off this product like you do with other TSP cleaners.
Using a cap or two in a spray bottle (I free pour) and topped up with water, spray your piece down and use some elbow grease to give it a good clean.
You will be surprised at how much dirt comes off. Seriously - do not skip this step. Prep is the most important part.
If you are going to strip down the piece, I highly recommend Circa 1850 in the Gel consistency. Strippers are expensive. All different kinds are expensive. This large container is about $75CA. I can get it to go quite a long way, maybe 2-3 pieces (depending the size of the project), so realistically, you are only spending between $25-$40 on stripper per piece. However, that is significant compared to sanding pads. At the end of the day, my time is money, so I prefer the more efficient (and satisfying) option.
First - please make sure you are in a well ventilated area and using PPE.. This is NOT the worst smelling stripper I have used (Yes - I hear all of the possible jokes about strippers in my head, but I will leave that to your own imagination). But it still can burn your nostrils when using. So open a window, turn on fans, crack the garage door a bit.. Whatever you need to do to protect those brain cells! Fortunately, we have a fan that sucks out dust and odours in our garage.
Pour the stripper onto your piece, I like to keep it in the centre so it doesn’t drip off all of the edges. Then use a metal putty knife to spread it around. You will want to have a thick layer of stripper on the surface. As the stripper dries, it evaporates, so the product will naturally thin out. if you do not have enough on the surface, it won’t be able to chew through the original finish. Work Smarter, not harder.
Next, we need to sand down the piece entirely. Even though the Stripper removed the varnish and most of the stain, remember, stain still penetrates the wood. The good news? We can use a less abrasive sandpaper at this point. So I usually start with either 120 or 180. You do not need to press hard on the surface. Just enough that you see the finish coming off. If you are already using 180, make sure the piece is completely free of all previous finish.
Typically I go right up to 220 grit sandpaper, but with paint washes, I have learned that leaving some of the grain open works better to allow the finish to seep into the wood.
If you have a dresser with deep grooves or ornate details, this is where your Dremel and/or carbide scraper will help. Then you will probably still need to use good old fashion sanding by hand for any extra difficult areas to get into.
None of this is difficult! Just time consuming. Hang in there. You got this. This is where you need the motivation from someone who has been there to say - YOU ARE SO CLOSE TO THE END! Don’t Give up!
Ok! Now the fun part that we have been waiting for! THE PAINT WASH!
Grab your water based paint - I used Wood Wick by Fusion Mineral Paint and some water. It’s time to make your paint wash! Don’t be intimidated by this process. It’s actually fun and super easy. I usually use a red solo cup and add about a quarter cup of paint and the same amount of water, PLUS another tablespoon or 2 of water (about 40:60 paint:water).
I prefer to use more water than paint because you can always add more pigment if the tone isn’t quite right. If your paint colour is too pigmented it could mean more sanding to lighten it up.
Once your wash is made, you’re ready to go! Grab 2 lint free cloths - one to apply, and one to wipe off, a mister of water, and your cup of paint wash!
If you find that you have excess liquid sitting on top, grab the second clean cloth and wipe back the excess.
If you have been looking at your washed piece thinking “Something just isn’t quite right”… believe me. I have been there with almost every piece I do. I’m not kidding when I say that hardware is like the frosting on the cake. It’s the jewelry. The finishing touch. It IS what was missing. So before you second guess yourself, just wait a minute and go get that hardware.
Here is the final result! I am absolutely in love with this colour. Here is the super exciting part - it sold within the first 20 minutes after I shared the TEASER with just the top corner on my stories.
If you are going to be flipping furniture for income, STAGING is the most important part for your sales experience. But perhaps that will be in another Blog post.
Please leave me a comment what you think of this blog or any questions that you may have! Thanks friends!